☏  01284 749211
or   01284 718773
✉ sales@totallocker.co.uk
Mastercard & Visa accepted
🛒 View Cart
 

RONIS Tronic Slim Electronic Keypad Locker Lock


RONIS Tronic Slim Keypad Lock

Tronic Slim Click to enlarge

Locker Locks 
Locker Parts and Servicing 
  Electronic Locker Locks  Locker Locks  Identify a Locker Part  Retrofit Lock Guide  Coin Lockers


Itemcode: Tronics1

Tronic Slim


Price: £70.35 Plus V.A.T.
£84.42 V.A.T. Inc

 

RONIS Tronic Slim keypad lock replacing Euro coin lock  Tronic Slim combination lock 
Click to enlarge


 
Features

RONIS Tronic Slim Electronic Keypad Lock for Existing Lockers

The RONIS Tronic Slim is a keypad-operated furniture and locker lock for compatible installations. It offers a way to replace coin-dependent access with an electronic user code while retaining serviceable lockers where the existing door can accept the new lock.

Single-User and Multiuser Locker Access

The manufacturer's manual describes two operating modes. In multiuser mode, a visitor secures a locker using a four-digit code; the code is cleared when the locker is opened at the end of use. Single-user mode supports assigned locker access. Administrators have a separate five-digit master code.

Electronic Management and Inspection

Management functions include authorised inspection access, clearing user codes and optional programmed opening times. The instructions describe electronic master and settings keys used with a USB-C adaptor; management software and accessories may be required. Confirm the equipment needed for your installation before ordering.

Upgrading Coin-Operated or Keyed Lockers

The Tronic Slim may be suitable when upgrading existing coin-operated or keyed lockers to PIN access. However, it is not a guaranteed drop-in replacement for every Euro coin lock. Check the current door opening, fixing positions, door thickness, latch arrangement, handedness and space behind the door against the manufacturer's drawing.

Check Wet-Area Suitability Before Ordering

The linked documentation specifies an IP45 rating for the lock case but does not specify the keypad IP rating. It also instructs installers to protect electronic components from moisture. For swimming pools, humid changing rooms or exposed locations, obtain confirmation that the complete proposed installation is suitable.

See the Tronic Slim instruction manual and fitting drawing, compare our electronic locker locks, or request lock identification assistance before undertaking a multi-lock conversion.

 
SpecificationSpecification sheet

RONIS Tronic Slim Electronic Locker Lock Specification

The RONIS Tronic Slim provides keypad access for compatible lockers and furniture. The manufacturer's instruction manual describes four-digit user codes, a five-digit master code, and single-user and multiuser operating modes.

Access and Management

Tronic Slim keypad and management functions
FeatureDocumented specification
User PIN4 digits
Master PIN5 digits
Operating modesSingle-user and multiuser
Multiuser operationThe temporary user code is cleared on opening, allowing the next user to choose a code
Administrative openingMaster code or compatible electronic master key using the specified USB-C adaptor
Inspection functionAuthorised access without deleting the user's code when completed within the specified procedure
Code resetAdministrator procedure available to clear a user code
Optional management settingsScheduled opening, acoustic signal and status-LED settings, using compatible software and electronic settings key

Environmental and Performance Information

Manufacturer's figures from the linked Tronic Slim instructions
PropertyManual specification
Ingress protection Lock case: IP45. The manual does not specify a separate keypad IP rating.
Working temperature-5°C to +70°C
Latch-force testOver 45 kgf
Life testOver 200,000 cycles
Vibration test10–200 Hz, 2 g
UV testOver 10,000 hours
Electrostatic discharge8,000 V
Published battery-life figureOver 70,000 cycles or 2 years, as stated in the linked manual; not a guaranteed replacement interval

Installation Dimensions and Compatibility

Check the Tronic Slim instruction manual and dimensioned drawing before ordering. The drawings distinguish the visible keypad, lock body and rear assembly. Do not assume that an existing Euro coin-lock opening, door thickness, cam or latch position will accept the Tronic Slim without modification.

For a replacement installation, confirm the door material and thickness, existing cut-out, fixing positions, door handing, latch engagement, available clearance behind the door and access for servicing the battery pack. Where several locker types are installed, check a representative door before ordering a full quantity.

Moisture and Wet-Area Use

The manual specifies IP45 for the lock case, but does not give an equivalent rating for the keypad. It also instructs installers to protect electronic components from moisture. Suitability for swimming pools, shower areas and other humid or wet locations must therefore be confirmed for the complete installation before ordering. The IP45 case rating alone is not a whole-lock waterproof claim.

Battery Replacement and Electronic Override

The manufacturer's instructions describe electronic master-key access through a USB-C adaptor and a timed battery-change procedure. The battery pack must remain connected as directed during replacement to avoid losing programmed time settings. Do not treat the electronic master key as a mechanical override key; confirm accessory supply separately.

Download the Tronic Slim instructions and dimensions (PDF)

Related Locker Locks and Retrofit Guidance

Compare other electronic locker locks, review our locker lock retrofit guide, or use the locker part identification service to check an existing installation.

RONIS Tronic Slim FAQs

How many digits are used for the Tronic Slim codes?

The manufacturer's instructions specify a four-digit user code and a five-digit master code.

Can Tronic Slim be used for shared or assigned lockers?

Yes. The manual describes multiuser mode for changing users and single-user mode for assigned access. In multiuser mode the user code is erased when the lock is opened, making the locker available for a new user.

Does the Tronic Slim directly replace every Euro coin lock?

No. A retrofit depends on the existing door cut-out, thickness, fixing positions, available space and latch arrangement. Check the dimensioned drawing and the existing locker before ordering; some installations may require alterations.

What is the Tronic Slim IP rating?

The linked instructions list IP45 for the lock case but do not specify a separate keypad IP rating. The manual also says to protect electronic components from moisture. Confirm suitability for wet or humid locations before installation.

How can an authorised manager open the Tronic Slim?

The instructions describe opening with the five-digit master code or a compatible electronic master key connected using the specified USB-C adaptor. Inspection and user-code deletion are separate procedures. There is no documented mechanical key override in the linked instructions.

What happens to the user code after a locker is opened?

In multiuser mode, the user code is cleared on opening so the locker can be used by someone else. Single-user mode operates differently, retaining assigned access until the code is changed according to the instructions.

How long do Tronic Slim batteries last?

The instruction manual hosted on our website quotes more than 70,000 operations or two years. Actual servicing intervals depend on use and battery condition. Follow the manufacturer's battery-change procedure so programmed time settings are not lost.

Can the Tronic Slim be programmed to open automatically?

The manual describes scheduled automatic opening using management software and a compatible electronic settings key. Check that the necessary management equipment and setup are available for your installation.

Where can I check the Tronic Slim dimensions?

The manufacturer's installation instructions contain a dimensioned drawing showing the keypad and lock components. Compare those measurements with the existing door and rear clearance before ordering.

Where can I find help upgrading existing locker locks?

Read our locker lock retrofit guide, compare electronic keypad locker locks, or send photographs and dimensions through our part identification service.

 
Delivery

Delivery Information

The approximate lead time is 15 Working Days.

Standard delivery is available to mainland UK addresses, Monday to Friday between 8:00 am and 5:00 pm.

Deliveries are kerbside only. Products may be delivered by a third-party pallet or specialist carrier using a suitable commercial vehicle.

The customer is responsible for providing suitable personnel and equipment to unload the delivery safely.

Please tell us before ordering about restricted access, specific delivery dates or times, FORS requirements or other special delivery arrangements. These may be available at an additional cost.


© 2026 Total Locker Service (Safe Secure Locker Services Ltd)
21 Dewar Lane
Kesgrave, IP5 2GJ - 01284 749211
Reg. Co. 06467889 | VAT Number: 928 535204
Suffolk