KL10 Mechanical Combination Locker Lock
KL10 Keyless Mechanical Locker Lock
Click to enlarge
Features
KitLock KL10 Mechanical Combination Locker Lock
The KitLock KL10 from Codelocks is a four-wheel mechanical combination lock for compatible lockers, cupboards and cabinets. Everyday access needs no key, batteries, wiring or electronic programming.
This listing is for the private-function KL10. A user retains the same four-digit code until it is deliberately changed. It is intended for assigned school, workplace and staff lockers, rather than day-use lockers where each visitor needs to choose a new temporary code.
Why Choose the KL10?
- Simple keyless access, without battery maintenance
- Four-number combination selected for an assigned user
- Compact mechanical design with locked and unlocked indicators
- Combination can be changed while the lock remains on the door
- A separately purchased Code Finding Key supports authorised code retrieval
- Suitable for compatible new doors and cam-lock replacement projects
Suitable Locker and Cabinet Applications
Private function is useful where an individual or a small, authorised group repeatedly uses the same compartment. Typical installations include assigned staff lockers, school lockers, office cupboards, personal drawers and indoor equipment cabinets.
For visitor, changing-room or leisure lockers allocated to a different person after every use, choose a public-function lock instead. Codelocks offers other KL10 function versions, but those should not be confused with the private-function product sold on this page.
Before Ordering a Replacement KL10
Check the current lock, door thickness, mounting aperture, cam engagement and clearance behind the door. A compatible cam lock may be replaceable; a hasp-type lock or unusual locker door may need different preparation. If unsure, send photographs of the existing lock from both sides and the required quantity to sales@totallocker.co.uk.
For exact fixing dimensions, available cams, code resetting and the separately supplied management key, use the Specification section below and the manufacturer document linked there.
Compare mechanical combination locker locks, browse Codelocks KitLock products, or consider electronic keypad locker locks where electronic features are required.
Specification
Please see our technical documentation for this product below KL10 Mechanical Combination Locker Lock Specification
KL10 Private-Function Technical Specification
The details below describe the private-function mechanical KL10 offered on this page. Refer to the Codelocks fitting instructions before drilling a new door or replacing a different lock mechanism.
| Manufacturer / range | Codelocks / KitLock KL10 |
|---|---|
| Operating function supplied | Private function, one retained four-digit user combination |
| Code mechanism | Four-number mechanical wheel combination |
| Possible combinations | Up to 10,000 |
| Power supply | Not required |
| Body material and finish | Black powder-coated zinc alloy |
| Door handing | Non-handed; check cam engagement |
| Maximum door thickness | 18 mm, fixed-spindle version |
| Door aperture | 19 mm diameter spindle hole |
| Lock face diameter | 58 mm; consult the current fitting drawing |
| Body depth | 25 mm; check rear clearance |
| Straight cam | 44.7 mm |
| Alternative cranked cam | 50 mm, subject to supplied pack or separate availability |
| Management tool | Code Finding Key, ordered separately |
| Installation environment | Indoor use; not suitable for chlorine atmospheres |
Fitting-pack note: Codelocks documentation from different editions describes different supplied cam and fixing packs. Do not assume that a cranked cam, washer or clip is included with every individual unit. Confirm the contents of the exact supplied pack when ordering.
Installation and Compatibility Checks
For an existing cam lock, remove the original lock, check that the KL10 spindle fits the opening, secure the body using the correct fixing, and confirm that the chosen cam reaches the frame without binding. A different cam or door preparation may be needed for a non-standard installation.
For a new door, use the current Codelocks mounting drawing to position the spindle hole and allow sufficient clearance for the casing and rotating cam. Do not drill additional fixing holes unless required by the supplied mounting arrangement.
Test the fitted lock repeatedly with the door open before
closing the locker. The factory preset for the private-function model is
0-0-0-0; change it during commissioning and record access
arrangements in accordance with the site's procedures.
Changing and Recovering a Combination
Changing the User Code
With the lock open, enter the current combination, press and hold the reset control, set the replacement four-digit combination, and release the reset control. Check the new code before scrambling the wheels or closing the door. Follow the installation instructions supplied with the lock.
Authorised Forgotten-Code Retrieval
The KL10 has a code-retrieval facility for authorised site personnel using a compatible Code Finding Key. The key is sold separately; it is not required by ordinary users. Keep management keys secure and ensure replacement staff know where approved access arrangements are recorded.
KL10 Technical FAQs
What size hole is needed for a KL10 lock?
The standard spindle-hole preparation is 19 mm in diameter. Check the current fitting drawing and clearance before modifying a locker door.
What is the maximum door thickness for the KL10?
The standard fixed-spindle KL10 is specified for suitable doors up to 18 mm thick.
Which cam is required for a KL10 installation?
The standard straight cam is 44.7 mm. A 50 mm cranked cam may suit other frame arrangements. Confirm the required cam and actual supplied pack before ordering.
Can I change the KL10 code while the lock is fitted?
Yes. With the lock open and the current code entered, use the reset control as described in the Codelocks instructions. Test the new code before closing the door.
What if the KL10 code is forgotten?
Authorised personnel can retrieve a forgotten combination with the compatible Code Finding Key, which is supplied separately from the standard lock.
Will the KL10 replace an existing cam lock?
It may replace a compatible cam lock, provided the mounting hole, door thickness, cam reach and clearance match. The existing lock model alone does not guarantee compatibility.
Is the KL10 suitable for left- and right-hand doors?
The KL10 is non-handed, but the cam must engage correctly with the particular door and frame.
Can a KL10 be fitted in a swimming-pool changing area?
Codelocks specifies internal use and advises that the KL10 is not suitable for chlorine environments. Ask about an alternative lock for poolside or chlorine-exposed locations.
Delivery
Delivery Information
The approximate lead time is 10 Days.
Standard delivery is available to mainland UK addresses, Monday to Friday between 8:00 am and 5:00 pm.
Deliveries are kerbside only. Products may be delivered by a third-party pallet or specialist carrier using a suitable commercial vehicle.
The customer is responsible for providing suitable personnel and equipment to unload the delivery safely.
Please tell us before ordering about restricted access, specific delivery dates or times, FORS requirements or other special delivery arrangements. These may be available at an additional cost.