Probe Locker Stands and Seat Stands
The stand increases the overall height of the unit by 150mm, giving 125mm clearance from the underside of the frame.
Legs are fitted with adjustable feet.
Locker seat stands
The stand increases the overall height of the unit by 350mm, giving 325mm clearance from the underside of the frame.
Rear legs are inset by 25 mm to clear skirting boards etc, and the bottom of each leg is fitted with a plain bung.
The hight to the top of the seat slat is 375mm.
Seat stands are fitted with 3 Ash hardwood slats as standard there is an option for compact grade laminate slats.
Need to keep your lockers off the floor for ease of cleaning, often in food environments, it is a requirement to keep the lockers off the floor for ease of cleaning.
Locker stands to prolong the life of metal lockers by keeping them out of the way of water and floor cleaning equipment.
Locker seat stands
Locker seat stands to provide all the benefits of locker stands with the addition of a seat in front of the lockers.
Seat stands make it possible to provide seating in changing rooms where space is at a premium.
Both stands and seat stands are available for a single locker, two lockers or three lockers.
The approximate lead time for stands and seat stands is 15 working days.
Delivery to Mainland UK only and without any restrictions.
Our delivery times are; Monday – Friday 8am to 5pm.
We will deliver using the most economical method, either using our own vehicles or a carrier. Goods may be palletised and delivered on an articulate vehicle. The deliveries are kerb side only so you would need to arrange to unload the vehicle. If there are any delivery restrictions / specific dates / times / dedicated deliveries, or FORS Registered deliveries, please contact the sales department as there may be an additional cost.
Probe locker page Probe locker parts