Classic Coin Lock 5 mm Spacer Plate
Classic Coin Lock Acrylic Spacer Plate
Click to enlarge
Classic Coin Lock
Features
5 mm Spacer Plate for Classic Coin Locks
This 5 mm cast-acrylic spacer plate is used when a Classic coin lock requires additional spacing between the lock body and the locker door.
The spacer helps position the lock correctly during installation or replacement. For the compatible Helmsman fitting described on this page, two spacer plates are required for each lock.
Confirm the locker manufacturer, lock model and existing door arrangement before ordering. Similar-looking coin locks may use different fixing dimensions or spacing requirements.
What Does the Spacer Plate Do?
A spacer plate increases the distance between the coin-lock body and the locker door. It may be required where the door construction, lock fixing or existing installation prevents the lock from sitting in the correct position without additional spacing.
| Installation issue | Role of the spacer |
|---|---|
| Lock sits too close to the door | Provides additional separation between the lock body and door |
| Existing fitting uses spacer plates | Allows the replacement lock to reproduce the established fitting arrangement |
| Compatible Helmsman installation | Two 5 mm plates provide the spacing required for the fitting described on this page |
| Replacement or refurbishment work | Provides a replacement for missing or damaged spacer plates |
Check Coin-Lock Compatibility
Do not select the spacer by appearance alone. Classic coin locks can be fitted to different locker doors and may use different mounting arrangements.
| Check | Information required |
|---|---|
| Locker manufacturer | Identify the locker brand, including whether it is a Helmsman locker |
| Lock type | Confirm that the installed or replacement lock is a compatible Classic coin lock |
| Existing spacer arrangement | Record the number and thickness of any plates already fitted |
| Door construction | Check the door material, thickness and lock mounting position |
| Fixing dimensions | Compare the plate and lock-fixing dimensions with the existing installation |
| Photographs | Provide clear front, rear and side photographs where identification is uncertain |
How Many Spacer Plates Are Required?
For the compatible Helmsman fitting described on this page, order two spacer plates for each coin lock.
| Number of locks | Spacer plates required |
|---|---|
| 1 lock | 2 spacer plates |
| 5 locks | 10 spacer plates |
| 10 locks | 20 spacer plates |
| 25 locks | 50 spacer plates |
Confirm the required quantity before ordering where the existing installation differs from the Helmsman arrangement shown.
Fitting and Replacement Checks
- Inspect the existing installation: record the position and number of any spacer plates before removing the lock.
- Compare the replacement components: check that the lock and spacer match the original fixing arrangement.
- Position the plates correctly: reproduce the established spacing and alignment.
- Tighten the fixing carefully: secure the lock without overtightening or damaging the acrylic plate.
- Test the lock: check the key, coin mechanism, latch and door operation before returning the locker to use.
Where the original fitting is incomplete or the lock cannot be identified, provide photographs and measurements before ordering replacement parts.
Specification
Classic Coin Lock Spacer Plate Specification
This cast-acrylic spacer plate is used with compatible Classic coin-lock installations where additional spacing is required between the lock and locker door.
| Product type | Coin-lock spacer plate |
|---|---|
| Compatible lock type | Compatible Classic coin locks |
| Material | Cast acrylic |
| Plate thickness | 5 mm |
| Helmsman fitting quantity | Two spacer plates per compatible lock |
| Typical application | Replacement, refurbishment or installation of compatible locker coin locks |
Confirm the existing lock, locker manufacturer and spacer arrangement before ordering. Coin locks that appear similar may use different fixing dimensions.
Spacer Plate Order Quantities
For the compatible Helmsman installation described on this page, calculate the required quantity at two spacer plates for each lock.
| Coin locks | Spacer plates required |
|---|---|
| 1 lock | 2 plates |
| 2 locks | 4 plates |
| 5 locks | 10 plates |
| 10 locks | 20 plates |
| 25 locks | 50 plates |
| 50 locks | 100 plates |
Check the existing installation before ordering large quantities, particularly where lockers have previously been repaired or modified.
Information Needed to Confirm Compatibility
| Information | What to provide |
|---|---|
| Locker manufacturer | The manufacturer or locker-range name, including Helmsman where applicable |
| Lock identification | Any model number, name or marking shown on the Classic coin lock |
| Existing plates | The number and thickness of any spacers already installed |
| Door details | Door material, thickness and lock mounting arrangement |
| Photographs | Clear images of the front, rear and side of the fitted lock |
| Measurements | Overall plate dimensions and fixing-opening dimensions where available |
Classic Coin Lock Spacer Plate FAQs
What is a Classic coin-lock spacer plate?
It is a plate positioned between a compatible Classic coin lock and the locker door to provide the spacing required by the installation.
How thick is the spacer plate?
Each cast-acrylic spacer plate is 5 mm thick.
How many spacers are required for a Helmsman lock?
Two spacer plates are required for each compatible Helmsman Classic coin-lock installation described on this page.
Does this spacer fit every Classic coin lock?
Compatibility should be confirmed before ordering. Similar coin locks and locker doors can use different plate dimensions, openings and fitting arrangements.
How do I identify the correct locker-lock spacer?
Check the locker manufacturer, coin-lock model, existing spacer quantity, plate thickness and fixing dimensions. Where identification is uncertain, provide clear photographs and measurements through the locker parts and service section.
Can the spacer be used when replacing an existing coin lock?
It can be used where the replacement lock requires the same compatible spacer arrangement. Record the original plate position and quantity before removing the old lock.
Where can I find replacement coin locks and locker parts?
Related products are available from the locker parts and locker locks sections.
Delivery
Delivery Information
The approximate lead time is 5 Days.
Delivery to Mainland UK only, without any restrictions.
Our delivery times are; Monday - Friday 8am to 5pm.
We will deliver using the most economical method, using either our own vehicles or a carrier.
Goods may be palletised and delivered on an articulated vehicle.
The deliveries are kerb side only, you will need to arrange to unload the vehicle.
If there are any delivery restrictions / specific dates / times / dedicated deliveries, or FORS Registered deliveries; please contact the sales department as there may be an additional cost.