Industrial Wire Mesh Lockers

Industrial wire mesh lockers are ideal when you need that bit more strength than a standard wire mesh locker.

The 25 x 25mm ERW tubular frame gives the locker rigidity and strength.

Industrial wire mesh lockers are often used in fire station changing rooms, industrial, maintenance workshops, warehouse and offshore, the added visibility allows for enhanced security and the ventilation allows damp clothes to dry.

Our Range of Wire Mesh Lockers are manufactured from 25mm x 25mm x 2.5mm wire mesh and 25 x 25mm ERW tube steel.

The overall locker height is 1974mm including 150mm legs.

Lockers are 305mm wide and are available in 2 standard depths, 305mm deep and 457mm deep.

Single door lockers have 3 point locking for added security.

Wire mesh lockers

Our wire mesh lockers are on a 10 day lead time for standard products

We can manufacture wire mesh lockers outside of our standard product range one of our popular variations is wire mesh lockers without doors

Given sufficient volume we can change the height width and depth of our lockers

Our wire mesh lockers are available in a number of finishes dependent on the environment the lockers are to be used in this includes powder coating

Standard wire mesh lockers are supplied with a hasp lock this can include 3 point locking on larger door units and there is an option to fit a coin return lock.

Materials

All our materials are sourced from European suppliers and manufacturers.

Our lockers are manufactured in the UK, from high quality materials so you can depend on getting a quality product.

Our lockers are available in different pitches, thickness, in mild steel, 304 or 316 stainless steel. Below is a list of some of the base materials we use

• Spot Welded Wire Mesh
• Tube / Box Section
• Round Bar
• Flat Bar
• Angle Bar

We can also incorporate some sheet metal into our products, such as solid shelves for wire mesh lockers or solid bases for baskets.

Finishes

We can provide an almost unlimited range of finishes and colours that can enhance the durability and aesthetic appeal of any wire mesh product.

BZP (Bright Zinc Plate): our most popular finish. Plating to 8 micron depth, prevents oxidisation of the steel and results in an attractive silver-blue colour

Gold Passivate: yellow zinc is electro-plated to our standard BZP finish, to provide additional corrosion and high temperature resistance. Improves durability to mild steel products used in humid conditions, and outdoors. Results in a gold sheen to the metal surface

JS500 (Electro galvanised): can be applied as a final finish (on top of BZP and gold passivate). It is a non-toxic leach process which forms a protective layer to further improve corrosion resistance for use in more extreme environments; humidity, abrasion, corrosion and outdoors; it is water based and non-hazardous, protecting the surface from salts and other chemicals. This plating process adds an iridescent finish.

All of the above coatings are subjected to British Standard Salt Test (results are shown below in hours) the minimum time for the coating to secrete zinc oxide in the form of a white powder.

These figures have been obtained from BS1706:1990 electro coating of zinc and cadmium on iron and steel methods. We do not recommend any of the above finishes be subject to harsh cleaning agents or detergents as this may shorten the life of the product.

• BZP finish (Silver): 48 hours under salt test
• Gold Passivate (Gold): 72 hours under salt test
• JS500: 250 hours under salt test

Powder Coating: sprayed on to the metal surface and attaches electro-statically before being cured by heat to create a tough, hard finish. We can usually powder coat to match any corporate colour or branding scheme.

Plastic Coating: offers additional rust protection to the mild steel base material, as well as producing a softer finish. We can usually plastic coat to match any corporate colour or branding scheme.

Other Finishes: whilst the above finishes are suitable for most applications, we can also supply wire mesh products in other finishes

• Powder coated
• Chromed Plated
• Electro-polished
• Hot-dip galvanised

Talk to us about where you'll be putting our products and how you'll be using them and we'll advise you on the most appropriate finish.

---