Pure Clean & Dirty Divided Lockers

Clean & Dirty Lockers for Workwear and Staff Changing Areas

Clean and dirty lockers are divided staff lockers used where employees need to keep clean clothing separate from worn workwear. The physical divider creates distinct storage areas within one locker, helping staff organise personal clothing, uniforms and work garments without needing two separate lockers.

The Pure clean & dirty locker is part of the specialist Pure personnel range. It is intended for workplaces where clothing separation is useful as part of a site's changing, hygiene or laundering procedures.

What Is a Clean & Dirty Divided Locker?

A clean & dirty locker uses a permanent internal divider so one side can be used for clean clothing and the other for used workwear. This is different from a conventional single-door staff locker, where all clothing is stored together in the same undivided space.

The locker can support a controlled clothing-management process, but it does not replace the organisation's own hygiene, laundry, PPE or changing procedures. The way clean and used garments are handled should always be defined by the site.

When to Choose a Divided Locker

Workplaces That Use Clean & Dirty Lockers

Divided clothing lockers are commonly considered in factories, manufacturing sites, food-production environments, healthcare and pharmaceutical workplaces, engineering operations, utilities, workshops and other staff changing areas where employees change between personal clothing and workwear.

They can also be useful where employees wear uniforms, overalls or protective clothing and need a dedicated place to keep those garments separate from their own clothes during the working day.

Clean Clothing, Used Workwear and PPE

A divided locker can help organise clean uniforms, personal clothing and worn workwear, but the appropriate storage arrangement depends on the site's actual workflow. If dirty garments are removed for laundering after every shift, the locker allocation may differ from a workplace where employees retain and reuse their own workwear.

Where PPE is bulky, wet or requires active drying, compare the storage volume and drying requirement before selecting a clean & dirty locker. Larger workplace lockers or heated drying lockers may be more suitable for some equipment.

Clean & Dirty Lockers vs Two Separate Lockers

Using a divided locker places both clothing areas within a single locker footprint. This can be useful where every employee requires both clean and used clothing storage but changing-room floor space is limited.

Two separate lockers may still be appropriate where the site needs completely separate storage locations, much larger garment capacity or a workflow that physically moves used garments away from the clean changing area.

Choosing Locks for Divided Staff Lockers

The locking method should suit how the lockers are allocated and managed. Assigned staff lockers often suit keyed or padlock-operated locking, while shared or higher-turnover environments may benefit from combination or electronic locking.

Compare available locker lock options before finalising the specification.

Planning a Clean & Dirty Locker Installation

Before requesting a quotation, confirm:

• the number of employees who require divided storage
• whether lockers will be permanently assigned or shared
• the type and volume of clean clothing being stored
• the quantity of used workwear retained between shifts
• whether PPE or footwear also needs storage
• the available changing-room floor space
• the preferred lock type
• required colours and top configuration
• delivery access and positioning requirements

For a broader comparison of staff storage options, see our workplace locker range. For clothing storage without dedicated clean/dirty separation, compare garment lockers.

Need Help Specifying Pure Clean & Dirty Lockers?

Tell Total Locker Service how many users require storage, what clothing or PPE needs to be separated and the available room dimensions. We can then help narrow down the appropriate Pure locker configuration, lock and colour options.

Pure Clean & Dirty Locker Specification

Dimensions and Internal Layout

Dimensions are nominal. Confirm the current specification, colour, locking option and any accessories when ordering.

Pure Personnel Locker Comparison

Technical Documentation

Pure Locker Brochure   Pure Colour Chart