Trade Laminate Engraving

August 20, 2019 Locker parts, Locker service, lockers, Storage, Uncategorized

Total Locker Service provides a very competitive engraving service. We have a standard range of locker key fobs, locker number plates and escutcheons manufactured from 0.7mm, 1.5mm and 3mm laminate in a wide variety of colours. Our key fobs are supplied with a quality split ring.

Pricing from £0.80 plus VAT and P&P

Laminate locker numbers and Fobs

Probe Locker Number Plates

We can manufacture to order Probe locker plates at very competitive pricing. The laminate plates are white with black numbers designed to fit into the probe locker cardholder.

Laminate Key Fob

Laminate key pobs are manufactured from 3mm laminate, not 1.5mm which makes them very strong and tough and using 3mm laminate vastly improves the life of the fob. Our standard disc is 35mm diameter though other sizes are available. Key fobs are available in a wide range of colours and supplied with a quality split ring.

Trade Laminate Engraving — Locker key fob

Locker number plates

Locker number discs — Locker Number Plate

We supply a wide range of laminate locker number plates are available in round, square and rectangular and manufactured from 1.5mm laminate with a 3m adhesive back. Locker plated can be sized to your requirements.

Locker escutcheons

Locker escutcheons and conversion kits, we can provide replacements from our standard range or if you have a design we can produce the escutcheon from your drawing or sketch.

If you need any advice or information just call us on 01284 749211

Bowling club lockers

June 18, 2019 lockers, Storage, Uncategorized

Cambridge Park bows club approached Total Locker Service for replacement lockers for there changing rooms. We spoke in depth to them regarding there requirements and it was obvious that our standard bowling club locker was going to be too big for there needs. As a result, Richard had made a site visit measured both changing rooms and talked to the club we were in a position to make recommendations and work towards a quotation.

Selecting the appropriate locker

It was obvious that our standard bowling club locker was going to be too large for there requirements. As their previous lockers were smaller and had been more than adequate. Therefore we recommended a 5 compartment lockers 1780mm high x 300mm wide x 380mm deep. This locker is slightly larger than there previous wood lockers. At this point, we started to work up a layout from the servery. We could only nest the lockers in two as anything bigger would not fit the opening to the changing rooms.

Presenting the proposal

We worked up the most cost-effective solution that would meet their requirements and added a number of options that we thought would enhance the solution. Locker stands with infill panels to keep the lockers off the floor and kee rubish from collecting under the lockers, locker numbers and key fobs for ease of members use.

The club accepted our proposal and we moved to implementation, colour selection, once we had this information a colour chart plan and number sequence was generated and put to the club for approval.

Locker installation

Our team of installers arranged a date for the lockers to be delivered and installed. Before commencing work we communicated with the club and finalised any issues and agreed what was going to take place. We then installed the lockers to the stands and back to the walls. Fitted the locker door numbers and key fobs. On completion we walled the locker room with an appointed member of staff addressed any issues gave them a master key and secured an installation complete sign-off.

We also support our customers with a next day service for replacement locker keys

Key cutting next day service for a wide selection of keys

January 17, 2019 Locker parts, Locker service, lockers, Uncategorized

Key cutting, here at Total Locker Service, we offer a next day service on a large number of locker and coin lock keys.

Types of key

Coin lock keys
Metal locker keys

Coin lock keys

We offer ASSA 29220 and 13629, Lowe and Fletcher AA12 and AA30 on a next day service

Other ASSA series are available on a 2 week lead time.

Ojmar V series and soon to be added Ojmar standard key on a next day service.

All other Ojmar keys series are available on a 2 week lead time.

Metal locker keys

All other Ojmar keys series are available on a 2 week lead time.

Metal locker keys

We offer Probe, Helmsman, Link, Garran, Link and QMP locker keys on a next day delivery.

How to order keys

You can find most of our common keys at the following web page Key Cutting and order the keys at Probe key form

Just fill in the web form.

If you are not certain on which keys you need or how to order then give us a call on 01284 749211 and our friendly staff will be happy to help you.

Future improvements to our Website are due soon a key code search engine that you can enter the key number and it will identify the key you require.

We at Total Locker Service use the latest in computer-driven key cutting technology to allow is to cut keys from the codes you supply us on your lock or locker keys.

School lockers what is available for education

September 12, 2018 lockers, Storage

What lockers are available for use as school lockers and how to chose the most appropriate product. Lockers can be categorised by the resistance to damage, cost, locking methods and suitability to the user. You would not want the same hight lockers for key stage 1 and 2 as you would for key stage 3 and 4. We at Total Locker Service can assist you in selecting the most appropriate product for you. We have a vast product portfolio available and can assist you in your selection or we can specify something specific.

How to select school lockers

 First determine what is to be stored and the size of the items.
 Then how it is to be locked.
 The likelihood of the locker being damaged or abused.
 The environment the locker is in.

Locker size

Lockers are available from very small available for storing mobile phones and personal belongings to very large available door lockers.

Standard lockers are available manufactured in heights between 1775mm and 1800mm high; widths are usually available from 225mm to 450mm and depths from 300mm to 550mm.

These standard lockers are available with a single door, two doors, three doors, four doors, five doors and six doors, other options are available.

Locking methods

The standard locking method for all lockers is a key lock usually called a cam lock supplied with two keys or a swivel hasp lock to take a padlock usually supplied by the customer.

Other locking options depending on locker door type are coin locks, mechanical combination locks, electronic combination locks and RFID card locks are a selection.

Swivel hasp locks can be used as a handle for use with Key stage 1 students.

Locker duty

Basic lockers are manufactured from steel with steel doors. If you need a more robust product then there are laminate door lockers which are far more robust and resistant to damage and vandalisam, they are usualy twice the price of a metal locker. Beyond this, there is an extra heavy duty locker which was specificaly designed for use in schools.
Total Locker Service suport all our lockers in the after market and can provide you with keys locks and replacement doors.

Locker environment

If your lockers are to last and provide trouble free service you need to select lockers manufactured from the correct materials. Metal lockers are good for use inside a building that is dry and not to damp out side of this type of environment metal lockers will rust. Most metal lockers are supplied with locks that cant tolerates wet environments.

If you are to place lockers in a wet enviroment, the lockers need to have aluminium bodys and compact grade laminate doors this type of locker will function in wet and clorine environments.

For munisiple leisure and pools with large numbers of customers, you need to ensure that the lockers are such a heavy duty that they will cope with the throughput.

For external use, the best choice is plastic locks as they will cope with the rain, sum and are an incredibly heavy duty.

Industrial Wire Mesh Lockers

August 16, 2018 lockers

Total Locker Service has launched a new range of industrial wire mesh lockers. The locker benefits from a 25mm x 25mm steel box section skeleton making this locker incredibly strong.

This range of lockers has a number of optional items which include 7 polyester powder coat colours, sloping tops and coin and cam locking methods.

Industrial Wire Mesh Lockers options

Locker sloping top — Wire mesh optional sloping tops for Industrial Wire Mesh Lockers

Optional cam locks — Optional mastered cam locks each suppied with 2 keys

Features and benefits

Available as a nest of 1, nest of 2, or nest of 3, which saves you money on large projects

Complete with a high hat shelf and single coat hook

Fitted with a hasp and staple for use with your own padlock

Overall height includes 150mm legs; raising the mesh locker off the floor

Complete with wall fixing brackets

No assembly required

Direct from us; a trusted UK manufacturer

Can be easily handled

No nasty smells as the wire mesh offers increased ventilation, which helps damp clothes to dry naturally

Offers visible storage, so you can see what is being stored

Offers secure storage, giving you peace of mind your items are in a safe and secure place

Gives the user the option of using different types of padlocks for different levels of security

Allows you to clean underneath the locker

Allows you to secure the lockers to the floor, wall or back to back

Saves time on the installation as the lockers are fully assembled

Customised options are available

Technical specification

Locker Height: 1974mm (includes a 150mm base)

Locker Width: Nest of 1: 317mm / Nest of 2: 609mm / Nest of 3: 901mm

Locker Depth: 305mm or 457mm

Locking: Hasp & Staple (For use with your own padlock)

Material Specification

Mesh Size: 25 x 25mm

Wire Diameter: 2.5mm

Frames: 25mm x 25mm ERW

Finish: Grey Powder Ral 7035

A-Z Index Page Total Locker Service

August 5, 2018 Bench seating, bike storage, extreme plastic lockers, Key storage, Key strap, Locker parts, Locker service, lockers, outdoor lockers, plastic lockers, Postal lockers, Safety products, shelving and racking, Storage, Uncategorized

A

B

C

D

Disney security lockers

E

F

Fire rated lockers from Probe

G

H

I

J

Jason Bourne, Berlin and lockers

K

L

M

N

O

P

Q

Quick delivery cloak room bench seating

R

S

T

W

Z

AquaStore Swimming Pool Leisure Lockers

June 28, 2018 lockers

AquaStore Swimming Pool Leisure Lockers

Our AquaSatore leisure lockers have a strong pedigree, it has been used in municipal pool environments for over 15 years and many of the original locker installations still in use today.

This ruggedly constructed laminate door locker with aluminium body and strong plastic shelves has been designed to provide years of low maintenance use. The locker door hinge has no finger traps and uses a replaceable concealed coil spring to close the door, this is easily replaced. the locker doors are through fixed as this is the most robust method. Each door has an escutcheon into which a locker door number plate is fitted.

Our AquaStore locker can be used against a wall on a builders plinth or as island units in a back to back configuration lockers can be mounted on builders plinths our on dedicated locker stands. Laminate end panels are needed to protect the end of locker runs they are available as single or doubler end panels for island runs.

Lockers are available with 1 through to 6 doors in widths of 300mm and 400mm and depths of 450mm and 500mm locker hights are 1800mm and 900mm.

Locker doors are manufactured from compact grade laminate from our Formica or Arpa range providing a very extensive range of possible laminate door colours, different laminate colours can do provided to create striking visual effects.

For where space is at a premium lockers can be combined with seat stands, providing seating and lockers in the smallest footprint possible.

Locking methods

Coin locks are used on this locker as standard, the lockers are provided with coin return locks either L&F or Ojmar both the locks can be combined with coin collection boxes where the coins are to be retained as a revenue stream instead of returning them to the user.

Hasp locks for when you want your customers to use there own padlocks to lock the lockers.

Electronic combinations are available with locks from Ojmar, Code lock, ASSA and L&F being available.

RFID locks from Ojmar are available in both basic and advanced, the advanced is available with a rich sweet of additional features.

ZENBOX Lockers

Bench seating

Stainless steel lockers

Lockers

ZENBOX Leisure lockers for wet chlorine environments

June 19, 2018 lockers

ZENBOX Leisure Lockers

Total Locker Service sells and services all the leading makes of locker for leisure, schools, commerce in fact anywhere you need changing room equipment. This means we know the strengths and weaknesses for all of the makes and models of lockers and enables us to recommend the best locker solution for your needs.

We are not tied to any one manufacturer and our expertise and impartial advice means you get the best product at the best price!

ZENBOX lockers are the versatile solution for busy leisure changing rooms – Wet or Dry

Ojmar OCS electronic combination locks hard wearing and durable the lock is rated IP55 for wet area use.

Locks can be used standalone with a 4, 5 or 6 digit user code and a 6 digit master code.

This lock can be used in conjunction with optional software and remote control the remote control provides

the additional benefits of easy programming the locks or alternatively used as a master key preventing a security

risk by issuing the master code to staff. The remote control can also be used to download the Audit Trail and Events at the Lock
level with date time as well as the last used code.

Ojmar coin locks are versatile and hard wearing the best coin lock on the market, the locks are available with coin settings of

£2, £1, 50p, 20p, €1 and custom token setting. Locks can be used in conjunction with a coin collection box for when you want

to retain the coin deposited into the lock.

Hasp locks are a trouble-free system where the customers use their own padlocks or the facility provides padlocks at a fee.

This system has virtually no moving parts that wear and the life is long and problem free.

RFID card wrist strap operated locks for when you need more control over who uses the lockers and when they are to be used.

The locks are available as a basic lock that is locked or opened by a wrist strap or an advanced version that can be used in conjunction with

powerful software that will control who uses the lockers when they are available to be used and for a specified duration.

KL100 KL1000 electronic combination locks a good quality lightweight combination lock with good functionality at a reasonable price.

Wire mesh lockers

Stainless steel lockers

April 24, 2018 lockers, Storage

Stainless steel lockers

Total Locker Service has introduced a range of stainless steel lockers based on our very popular range of System 1300 mild steel lockers. This range is identical in every way other than the material used to make the lockers is stainless steel.

Our stainless lockers are ideal for food or clean areas the locks can easily be deep cleaned and pressure washed, Our lockers can be supplied with sloping tops to prevent dust and people storing items on top of the lockers. There is also a range of stainless steel lockers stands available to hold one through to three lockers, this is the perfect solution to allow cleaning under the lockers.

We can offer lockers in stainless steel from all our workwear and laundry locker range if you don’t see the product you need then ask us as it is possible we can manufacture it for you.

Our Stainless System 1300 lockers are available in one through to six compartments with or without sloping tops. As standard, the lockers have either cam locks or hasp locks to take a padlock. At a premium coin, locks or combination locks can be fitted to the lockers.

Standard dimensions for the lockers are 1775mm high for a flat top locker and for sloping top lockers 300mm deep 1875mm high and for a 450mm deep lockers 19725mm high. lockers are available as standard 225, 300, 380 and 450mm wide and 300, 380, 450 and 550mm deep.

Stainless steel locker stands are available to take one, two and three lockers.

If you are working in a wet or refrigerated environment then our heated lockers with skirted locker stands can be manufactured out of stainless steel.

If you need seating for use in a clean area or food area then we can manufacture our seating from stainless steel with hygienic compact grade laminate seat.

ZenBox Lockers

AquaStore lockers

Tool charging lockers

Coin locks

Tool charging lockers, small portable appliance battery charging lockers

March 21, 2018 lockers, Safety products, Storage

Tool charging lockers, small portable appliance battery charging lockers

There is a need to securely store and charge battery powered tools such as power drills and other industrial products. Our battery storage and charging lockers allow the safe storage and charging of portable battery appliances. Within industry there is a need to securely control battery appliances from barcode scanners, data loggers, cameras, portable inventory control loggers, portable radios and more. wherever you have the need to organise, securely store and charge portable appliances then tool charging lockers will help you achieve this.

Probe lockers

We at Total Locker service can provide you with a solution to meet your requirements. Our standard Tool charging lockers consist of 2 compartment, 3 compartments, 4 compartment, 5 compartment and 6 compartment lockers. We also provide a wide range of locking systems, our standard lockers have a key lock or swivel hasp lock to take a padlock. For a premium, we also offer coin return locks, mechanical combination and electrical combination locks along with other locking solutions. Our standard locker dimensions are 1775mm high x 300mm wide x 450mm deep. Each compartment has a single 3-pin UK socket or as an option a double 3-pin socket. there is a single power supply to the unit with the power supply cable exiting at the top of the locker.

customer specific tool charging lockers, we have the capability to manufacture appliance charging lockers to our customers requirements. This can be specific sockets including USB, reduced hight lockers or specific width our depth lockers.

Four door tool charging locker

Specification

Compartments 2 to 6
Height 1775mm
Width 300mm, 380mm and 450mm
Depth 300mm, 380mm and 450mm
Sockets 1 or 2 UK 3-pin sockets
Standard locking method key or hasp locks
Optional locking methods, coin locks, mechanical combination or electronic combination locks
Single power supply lead
Wide choice of locker door colours

Probe lockers

Laptop lockers