Coin locks that can take both new and old £1 coin

February 10, 2016 Locker parts, Locker service, lockers

Coin locks that can take both new and old £1 coin

Looking to buy new coin locks or lockers

Our new £1 coin locks will now work with both the old and new pound coins at the same time. So no problem with the phasing out of the old one pound coin and introducing the new coin as the lock will work with both at the same time.

Buying new lockers

If you are looking to purchase new £1 coin-operated lockers insist that they can be used on both the new and old £1 coins. You don’t want to have to change your locks in 2017 when the new coin is released.

Currently, have lockers fitted with £1 coin locks

Give us a call we will be happy to talk you through your options and what will best serve your needs.

New £1 coin received

Following the samples of the New pound coin we received in January, we have been looking at trying to make the

change as simple as possible now and next year.

To this end, Omar’s new style coin lock has been modified to work with both the Old and new style coins.

The images show the 76 wet area lock, Dry Area Lock, the 74 and standard key 75 ref Wet area locks and the new decal to show the lock works with both coins

Please let us know if you have any questions, call 01284718773

Coin locks and the new £1 coin

December 18, 2015 Locker parts, Locker service

Coin locks and the new £1 coin

Old £1 coin

Today the final round £1 coin was minted.

From 2017 the new 12 sided £1 coin will be introduced

Will the new coin fit into existing £1 coin Locks ?

No the size and shape of the new coin will require some modifications

Total Locker Service would like to help all our customers with the changeover to ensure customers get a smooth change and can look at all the options available now to avoid delays closer to the event.

The solution to new orders is simply to opt for the Adjustable version of the current coin lock you choose.

The beauty of this lock is that it can be adjusted simply with a template and small screwdriver and a replacement coin slot . WITHOUT taking the lock off the door, this will allow customers to run locks with both coin types as demand increases more locks can be adjusted.

But what about existing customers?

You can check if a lock is adjustable if there is a small notch in the top right of the lock, which is used to measure the coin size. If this is the case you can just supply a template and new coin slots when the new coins are introduced

If not then they can buy either new lock bodies to suit the new coin OR adjustable lock bodies now which can be gradually changed over to the new coin

Are there any other options we could suggest?

This could be the perfect time to change away from a keyed system!

Ojmar’s range of simple robust RFID locks are becoming the standard for leisure and fitness facilities worldwide giving options for revenue increase and secondary spend

Our Hasp Locks offer a cost-effective retrofit option, particularly popular with budget gyms for the ease of use, security and unique style

Or Go completely keyless with our OCS digital system, Auto opening, simple audit trails and easy to use software make this flexible system the ideal digital solution

What to do now?

This is an opportunity to really get to the bottom of your customers’ needs and offer them the perfect solution, with plenty of time to plan the change and revenue creating products which could pay for themselves.

Please give Total Locker Service a call on 01284 749211 to discuss your needs

We can establish with you how you will be affected by the pound coin change.

New £1 coin

New pound coin compliant coin locks, lockers

December 11, 2015 Locker parts, Locker service, lockers

New pound coin compliant coin locks, lockers

Today is the last day the curent round £1 coin will be manufactured.

Status updat on new £1 coin

We have not tested the Ojmar adjustable lock with a new one pound coin and they function perfectly.

All that is needed is a new coin stricter and to adjust the lock mechanism.

Work instructions will be available nearer the time.

We at total locker service are passionate about our products and want to insure that our customers receive long lasting value.

Make sure your coin locks that are 2017 new pound coin compliant

With the change announced to the British one pound coin to be introduced in 2017 all current coin locks taking the current pound coin are likely to need replacing.

As a result of the announced change to the pound coin in 2017 Total Locker Service in conjunction with Ojmar have introduced a range of £1 coin operated locks that are adjustable allowing them to be resized easily to accommodate new coin sizes. The locks can be adjusted by two discreet screws on the face of the lock. There is no need to remove the lock from the door. The only tools needed to adjust the locks is a screwdriver and a coin of the chosen size.

This range of locks includes a dry specification lock, wet specification locks with or without security key. All Ojmar locks have removable cylinders complete with 2 keys. All are lock cylinders have the key number engraved on the side of the cylinder so you know what key number to order.

Lock Adjustment

Ojmar patented system
Change coin size without dismantling lock
Work can be done without removing lock from locker
Requires a template and screwdriver (decal if different coin type)
Request on order

We fit the dry specification lock to our Premium system 1300 range of lockers. The Lockers are available in both wet and dry specification. You have a choice of 1 to 6 doors in a wide range of sizes.

The lockers are versatile and hard wearing and available in a wide range of colours. The locker lock is mastered with a removable cylinder, supplied with two keys, the key number is etched on to the side of the cylinder to make ordering keys easy. The lock is adjustable so there will be no problems when the pound coin changes size.

Ojmar lock information

Wembley Stadium locker Lock Conversion

May 14, 2015 Locker parts, Locker service

Wembley Stadium Locker Lock Conversion

Lock conversion Total Locker service solves Wembley stadiums locker problem. The stadium has over 2000 staff lockers, the lockers were fitted with key locks. Managing the keys had become impossible with the constant flow of staff using the locker facility. Total Locker has worked with Wembley on a number of options including replacement lockers. One of the advantages they have is the quality of the Probe lockers, the lockers were in very good condition.

Finally, they decided on our option to replace the current locks with swivel hasp locks, this will remove the problems with management of keys. this is not the ideal solution although it is the most cost-effective. They will still need to deal with the issue of lost padlock keys or combinations. The advantages and disadvantages of each opposed option was clearly identified and communicated with the stadium staff. Total locker has provided four sets of bolt cutters for dealing with padlocks, that need removing through lost keys or forgotten combinations.

wembley stadium

Our team of engineers have worked to their schedule, systematically working through the lockers and converting the cam locks to hasp locks, and replacing the current escutcheons where appropriate. They will also ensure that the lockers are functional and that any of the damaged locker doors are replaced.

Lock conversion

The swivel hap lock from Lowe and Fletcher is both nice looking and very durable.

20mm Latch Lock – model 4496

Suitable for a broad range of lockers and enclosures this versatile 20mm Latch Lock has a high-quality chrome finish distinctive head shape. It is available in nut fix form, horseshoe clip, or snap-in form and is suitable for left & right-hand operation and supplied with a choice of cams.

Features & Benefits

Latch Lock for many applications
Uses 6-7mm hasp padlock
Handle turns freely with padlock in place
Cam cannot be turned with padlock in place
Push in handle to engage cam motion
90° Engaged movement
Optional cam specification
We suggest fitting a 3mm thick cam as standard
Chrome finish
Attractive size

Leisure lockers Oxford Brookes

March 1, 2015 Locker parts, Locker service, lockers

Leisure lockers installed at Oxford Brookes

Leisure lockers

Total locker service installed our System 2000 leisure lockers fitted with Ojmar OCS electronic combination locks. Our engineers also converted 32 locks on existing lockers from coin return locks to the Ojmar OCS electronic combination locks.

Our skilled engineers installed the System 2000 lockers and converted their existing lockers in a single one day visit.

Our System 2000 lockers are robust and durable lockers designed to stand up to large usage municipal leisure environments. The lockers have a robust Arpa or Formica compact grade laminate door with a wide range of laminate colours and wood effects. Compact grade laminate is a hardwearing and robust material that is completely waterproof. The lockers we installed had a two colour checkerboard design. The locker carcass is manufactured from aluminium with extremely robust plastic moulded shelf, bases and tops. The hinge design is low maintenance and has no finger traps.

Locking options, we supply this locker with coin return, coin collect, RFID, electronic combination, hasp locks along with many more options.

Ojmar OCS

OCS touch lock locking solutions for lockers

A reliable keyless locking system with the ability to customise the lock to automatically open after a set amount of time or at a specific time of day. The lock is low maintenance with long battery life, resistant to humidity, wear and tear and continuous high traffic use.

Available in 2 different footprints, as temporary use or rental locks the OCS. Touch Lock is the ideal solution.

MAIN FEATURES

Touch technology, no membrane keypad
Available as temporary or rental lock
Available in black or white finish
2 different footprints available
Dry or wet area use versions available
Selectable user code length: 4, 5 or 6 digits
LED in 3 colours for lock status (green, red, amber)
Flashing led in order to show locked status
Automatic opening (via software)
Time-delay opening; i.e. 3 hours after locking the lock (via Software)
Low battery warning and detection.
Emergency opening
Contactless Programming key with USB port for PC connection
Contactless communication interface between Master key and lock OCS

Leisure centre coin locks, are they a ticking time bomb

January 17, 2015 Locker parts, Locker service, lockers

Leisure centre coin locks are they a ticking time bomb

Leisure centre coin locks

In 2017 there will be a new one pound coin issued. The new £1 coin will have the same shape as the 12-sided three pence piece or ‘threepenny bit’.

What effect will this have most leisure centre coin locks are designed to use the current round 22.5mm coin. When the new coin is released, it is highly likely your locks will not work with the new coin.

Will I need to change my coin locks

There is currently only one manufacturer of locks that can be adjusted so that they can be used with the new coin. This manufacturer is Ojmar and not all there locks are adjustable.

The remaining lock manufacturers do not have firm plans in place to deal with this. Some will produce conversion kits some will factory rework the locks.

Action needed to prevent unbudgeted costs

Audit your locks and establish what action is required
Put a plan in place
Don’t leave it to the last minute, there is likely to be a massive demand
Budget for the expenditure

Don’t wait too long

When the coin is released there is likely to be a massive demand that the lock manufacturers can’t cope with. Coin lock lead-times are normally 4 working weeks and this will only increase nearer the coin release date. Finding that your lockers will no longer work with the new coin will generate massive logistic issues within the leisure centre.

Is there a get out of jail card?

You can always purchase a large number of £1 sized tokens, though controlling issue or getting your customers to purchase them will bring its own issues.

Can we get help?

Yes, Total Locker Service will be happy to carry out an audit of your locker locks and advise you on your options.

About the new coin

The proposed new coin will be roughly the same size as the £1 coin, and has a number of features which the Royal Mint confirms will make it the most secure coin in the world. These features include:

a bi-metalic construction, of two colours
12-sided design
the inclusion of the Royal Mint’s new iSIS technology, (Integrated Secure Identification System), which incorporates three tiers of banknote-strength security and can be authenticated via high-speed automated detection at all points within the cash cycle

The proposed new coin represents a great success for UK science and manufacturing. The new, world leading iSIS technology has been entirely developed in-house at the Royal Mint’s headquarters in South Wales.

Why should we have our lockers and cubicles serviced?

September 20, 2014 Locker parts, Locker service

Why should we have our lockers and cubicles serviced?

Changing room equipment costs a lot of money so, if you look after your investment, you can avoid expensive and unexpected repair bills. You know too, that a good looking centre is good to work in, and attractive for your clientele.

We take product maintenance seriously, which is why we offer a range of packages to suit every type of locker area. Our packages include a free site survey to assist you with your servicing decisions and we offer 2 different service packages to meet the needs of different types of venue. We can service lockers, cubicles and benching.

We can do a one off service of all the lockers and changing cubicles on your site –
we will let you know the cost in advance. Normally the cost of servicing per locker door per visit is approx. £1.80* plus the cost of spare parts. * 2014 prices.

Based on a leisure centre with 200 locker doors. Or, you can have a service contract for up to 3 years. We do regular locker/cubicle servicing, aiming to achieve 100% working lockers and cubicles – if this is not achieved, we will let you know why.
If you take out a locker and/or cubicle service contract for 1 – 3 years, you also get savings on the spare parts prices. We will do site surveys free of charge and let you know the cost of a service.

Call us today 01284 718773 or email: service@totallocker.co.uk

Locker service Leeds City Council

September 7, 2014 Locker parts, Locker service

Locker service Leeds City Council

Total Locker Service has won the tender to supply Leeds City Council with service and parts for their leisure facilities lockers. The contract will run for the next 3 to 4 years. Total Locker Service has been servicing the lockers at the Leeds centres since 2008. The contract is a fixed price service agreement, we provide parts and labour and charge Leeds City Council a fixed price for servicing each locker door.

During this period, we have serviced the lockers at Leeds it is the opinion of the service engineer that we have extended the lifespan of the lockers. A proportion of leisure centres lockers when in a poor start of repair when we started the locker service contract. These lockers have now been returned to a good state of repair arresting further degradation. This over the contract period has resulted in postponing replacing lockers and eliminating a large capital cost.

All our service engineers have CSCS cards and have been fully trained to be vulnerable adult and children aware. We are also registered with Constructionline our registration number is no. 146222.

Service options available

We can provide a wide variety of service options
Fixed price service agreements
Service contracts number of visits per year, labour plus parts.
One off locker service

Benefits of a service contract

Fixed cost per year for locker servicing

Reduce parts and labour costs

Parts you require stocks

Locker parts

We stock a large number of locker parts this includes locker locks, hinges and other key components. We can also manufacture replacement doors and other parts needed to keep your lockers in good condition.

Our Ojmar coin operated locker locks are adjustable and can be reset to take the new £1 coin in 2017 so no need for costly replacement locks.

If you need replacement keys then no problem our parts team will help, you identify the correct key numbers and provide you with a quotation.

We manufacture and number our own wrist straps so we can provide them next day numbers at a competitive price. The straps are available in green, black, red, blue, yellow and orange.

Why not give us a call on 01284718773 or Email Us

Changing room lockers at Kerry Foods

August 19, 2014 Locker service, lockers, Storage

Changing room lockers at Kerry Foods

We have provided Kerry foods with changing room lockers previously. On this occasion, the space constraints were even more challenging. They have 3potential areas to fit lockers none of which would hold all of them. They also had definite ideas of what they wanted from their lockers. They needed to accommodate 76 staff, eliminate the need for locker keys. To be able to see into the lockers without opening the doors to eliminate the need for time-consuming locker audits.

We at Total Locker Service interpreted their requirement produced a specification and presented it to management. The specification was accepted with the addition of a cardholder to identify the employee assigned the locker. Most of the lockers are sloping top with the exception on 4 where there was insufficient room high due to obstructions.

Locker specification

Sloping tops
Hasp locks to take a padlock
Perforated locker doors
Locker stands
Locker dimensions 1925mm high x 225mm wide x 450mm deep
2 compartment lockers

The lockers were installed on a Saturday to prevent needless disruption to production at Kerry foods by our CSCS card holding installation team.

Should you have a particular changing room problem you would like Total Locker Service to resolve then give us a call on 01284 749211.

Kerry foods

Kerry has enjoyed phenomenal success since commencing operations in 1972. Our history traces the evolution and growth of Kerry Group – from its modestbeginnings in the south west of Ireland into a leading player in the global food industry.

Commencing from a green field site in Listowel, Co. Kerry, Ireland over 40 years ago, Kerry Group has realised sustained profitable growth with current annualised sales of approximately €5.8billion.

The dynamics of all food and beverage markets, lifestyle changes and the internationalisation of food tastes with a growing preference for convenience, variety and quality prepared foods or snack products, means the Group’s worldwide businesses are well positioned for continued growth and development.

We are confident that Kerry Group can continue to grow and develop its global business while continuing to build its added-value consumer foods offerings to our selected EU markets – in line with the Group’s Mission Statement.

Constructioline accreditation

August 12, 2014 Locker service, lockers, Storage, Uncategorized

Constructioline accreditation

Total Locker Service have achieved Constructionline accreditation and is now listed on the constructionline web site which can be accessed by procurement officers.

What is Constructionline?

Constructionline was established in July 1998 when CMIS and ConReg were merged. The service is owned by the DETR but operated by private company Capita under a public-private partnership. The service prequalifies consultants and contractors for public sector work. It does this by assessing their financial and technical ability, based on criteria set by the DETR. The service is free to clients and the public, but you need a computer and modem to operate it. A client enters requirements such as job, cost and location, and Constructionline compiles a report detailing firms qualified to do the work.

Total Locker Service

Supply and install lockers and changing room equipment into both wet and dry changing room environments. Our sales team will be happy to assist you selecting the most appropriate products to meet your needs. We supply a wide range of lockers, bench seating, cubicles and much more. Alternatively, if there is sufficient numbers we can design a solution for you. We can take you from concept to installation. Our engineers will survey and install your products.

Constructionline