ASSA Coin Lock Replacement Cylinders

ASSA Classic Coin Lock Replacement Cylinders

Total Locker Service supplies replacement ASSA Classic coin lock cylinders for compatible coin-operated locker systems. These removable cylinders are available in right-hand and left-hand versions and are supplied with two keys.

Replacing a worn, damaged or missing ASSA lock cylinder can restore key operation without replacing the complete coin lock, provided the existing lock body and coin mechanism remain serviceable.

ASSA Replacement Cylinder Models

The two cylinder configurations correspond to the original ASSA manufacturer references below. The letter A identifies the existing Total Locker Service catalogue code.

Select the cylinder corresponding to the original ASSA coin lock arrangement. Right-hand and left-hand cylinders should not be treated as interchangeable. Confirm the original reference and locking orientation before ordering.

ASSA Classic Key Series and Cylinder Compatibility

ASSA Classic coin locks use different key-series arrangements. A key-series number identifies the relevant keying range and should not be confused with the replacement cylinder product reference.

Common ASSA Classic series include 13629, 29220, 13734, 28220 and 27220. Additional series may be present on older installations. The required series must be confirmed against the existing lock, key or site key register.

If the replacement cylinder must operate within an existing keyed-alike or master-key system, provide the relevant key-series and keying information before ordering.

If only an additional key is needed, visit our ASSA Classic coin lock replacement keys page rather than replacing a working cylinder.

When Should an ASSA Coin Lock Cylinder Be Replaced?

A replacement cylinder may be appropriate where:

• The existing cylinder is worn or damaged and cannot operate reliably
• The cylinder is missing from an otherwise serviceable coin lock
• A cylinder has been damaged during attempted removal or previous maintenance
• An authorised change of keying arrangement requires a replacement cylinder

If the existing key has simply been lost, obtaining a replacement key may be sufficient. If the coin mechanism, housing, latch or other components are faulty, the cylinder alone may not resolve the problem.

Compatibility with ASSA Coin Return and Coin Retain Locks

ASSA Classic coin locks may be configured for coin return, coin retention or compatible token operation, depending on the complete lock assembly.

The replacement cylinder is the keyed operating component. It does not independently control the denomination accepted or whether the coin is returned to the user or collected.

Confirm that the existing ASSA lock uses the compatible removable-cylinder system before selecting a replacement.

ASSA Replacement Cylinders for Leisure Facilities

ASSA Classic coin locks are commonly installed in shared-use storage facilities, including swimming pools, leisure centres, gyms, changing rooms and workplace locker areas.

Replacement cylinders allow facilities teams to maintain compatible existing locker systems without automatically replacing every complete locking mechanism.

How to Identify an Existing ASSA Cylinder

Identify the original cylinder and lock before ordering. Where the reference is missing or unclear, provide photographs of the lock fitted to the door and the following information:

• Visible ASSA model and cylinder markings
• Right-hand or left-hand configuration
• Existing key-series or key number
• Cylinder dimensions and rear connection
• Complete coin lock model, where known
• Locker manufacturer or product range

If identification is uncertain, contact our locker parts and service team before ordering.

Buy ASSA Coin Lock Cylinders and Parts

Select the correct ASSA Classic cylinder configuration using the product options above. Confirm the required key-series information and quantity before completing the order.

Browse our replacement coin lock cylinders , view the wider ASSA locker lock range , or compare complete locker locking systems .

ASSA Classic Replacement Cylinder Specifications

These replacement cylinders are intended for compatible ASSA Classic coin locker locks originally fitted with removable cylinders. The supplied configuration must match the lock's handing and keying requirements.

Technical Specifications

Right-Hand and Left-Hand Cylinder Selection

ASSA specifies separate replacement cylinder references for right-hand and left-hand Classic coin lock configurations. The correct hand depends on the original locking arrangement.

Do not select a replacement solely from the visible position of the keyhole. Check the complete installed lock and its original manufacturer reference.

Fixed and Removable Cylinder Compatibility

ASSA Classic coin locks have been manufactured with both fixed and removable cylinder configurations. The replacement cylinders on this page are intended for compatible removable-cylinder assemblies.

A fixed-cylinder lock should not be assumed to accept a removable replacement cylinder. The original lock body and cylinder mounting must be checked before ordering.

Key-Series Matching

The ASSA key-series reference is separate from the replacement cylinder product code. When an existing installation uses a particular key series, that information is required to establish an appropriate replacement arrangement.

A series number alone may not identify the individual key combination. Where matching existing keys is required, provide the complete key or system reference available from the original installation or authorised site records.

Replacement and Installation Checks

Inspect the original cylinder and complete lock mechanism before replacement. Particular attention should be given to the rear connection, retaining arrangement and key operation.

Follow the correct removal and fitting procedure for the installed ASSA Classic lock version. Confirm that the replacement is securely fitted and operates correctly before returning the locker to service.

Following installation, check that the key operates smoothly, the locking mechanism engages correctly and the existing coin or token arrangement functions as intended.

Replacement Keys and Other Locker Cylinders

For spare keys using an established ASSA Classic key series, visit our ASSA Classic key cutting service .

Alternative manufacturer cylinders and selected refurbished options can be found in our locker cylinder range .