Total Locker Service®
Call us on
01284 749211
01284 718773 parts

Locker Specification System 1300


Lockers can be supplied as single units or nested in groups during the manufacturing process.  All lockers are holed in back and sides to enable them to be bolted together into rows or back to back to suit your requirements.
Note: When preparing locker room layouts allow approximately 4 mm extra for each nest for rivet heads at the sides of lockers in each row.


Spot welded and pop riveted.

Material & Finish:
Mild steel coated with polyester powder.
Door Frame Assembly:
Comprising two uprights manufactured from heavy gauge mild steel of press formed channel section; top and bottom cross members which are designed to create door stops.  Spot welded construction produces a rigid frame enabling door clearances to be maintained in accordance with British Standard requirements.  The top cross member is provided with a series of ventilation slots.
Doors are attached to the right hand side of door frame upright with two ‘five knuckle’ semi-concealed hinges per-door. 
Doors are fitted with a plastic escutcheon plate around the lock, which can also act as a name card/locker number holder.
The inside of the door has a full length vertical ‘stiffener’ to provide greater rigidity.
Two rubber buffers are fitted to the top and bottom corners of each door for quiet closure.
The bottom is formed as a 60 mm high plinth.  All edges have return bends and the front and rear edges drilled for fitting to stands or stands with seat.

Standard options are either 10 disc tumbler cam lock in mastered suite with two keys to each lock or, at no extra cost, a latch lock for the user’s own padlock (recommended padlock shank dimensions 6 mm).  Recommended padlocks are available from Total Locker Service.

As an optional extra for added security we can supply full reach espagnolette bolts giving three point locking (ie, top, bottom and centre) with either of the standard locking options.  We can also supply, as an optional extra, a door-mounted combination lock with master key over-ride facility and user codes which can be reset.


Ventilation is provided by a series of unique ventilation slots in the top cross member.

Colour Range:
Standard locker frame stove enamelled colours is: “Ice”.  Standard door stove enamelled colours are: “Ice”, “Rockpool”, “Smoke”, “Nimbus”, “Skye”, “Kingfisher”, “Royale”, “Forest”, “Cherry”.  The Helmsman general brochure illustrates these colours.  Exact colour samples are available.
The following can be supplied at an additional cost and, if included, will be specified in the quotation.

Combination Lock:

The standard cam lock or latch lock can be replaced with a door-mounted combination lock with master key over-ride facility and user codes, which can be reset.

Most parts of the locker can be perforated.
Locker Numbering:
a)  Number Label – Made of transparent vinyl, with a permanent, self-adhesive back.  Numbers are printed in black          and can comprise one to four digits.

b)  Number Plate – Made of laminated plastic, white numbers on black, numbers can comprise one to four digits.

c)  Number Discs – Laminated plastic 25 mm diameter, white numbers on black, numbers can comprise one to four          digits. The disc is holed and a split key ring is provided.


with Seats:
Lockers can be provided with either stands or stands with seats with or without adjustable feet. 
Sloping Tops:

Lockers can be manufactured with a sloping top.  Gradient 1:3, ie

                  300 mm deep unit increased height at rear 100 mm

                  380 mm deep unit increased height at rear 126 mm

                  450 mm deep unit increased height at rear 150 mm

                  550 mm deep unit increased height at rear 183 mm

End Panels:
For aesthetic appearance and to protect row ends, specifically designed end panels are available.

Total Locker service offers a full installation service for its products.

Specification sheets 

Product search

Construction Line 


Total Locker Service (Safe Secure Locker Services Ltd),
Unit 3, Vision Centre, 5 Eastern Way, Bury St Edmunds, IP32 7AB,  Reg. Co. 06467889, VAT Number: 928 535204